protofusion

open hardware and software

User Tools

Site Tools


luma:products

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
luma:products [2013/12/01 04:34] – [Luma-3L-R4.1] Ethan Zoncaluma:products [2023/03/23 02:48] (current) – external edit 127.0.0.1
Line 5: Line 5:
 ===== Current Models ===== ===== Current Models =====
 ==== Luma-1L-R4.1 ==== ==== Luma-1L-R4.1 ====
-{{:luma:luma4.1.jpg?200|}}+{{:luma:luma4.1.jpg?600|}}
  
 Current model with onboard 1 10W RGBW LED and integrated heatsink. Current model with onboard 1 10W RGBW LED and integrated heatsink.
 ==== Luma-3L-R4.1 [PRE-PRODUCTION] ==== ==== Luma-3L-R4.1 [PRE-PRODUCTION] ====
-Current model with 3 10W RGBW LEDs + 
-==== Luma-S-4.0 ====+{{:luma:luma-3l-4.1_sneak-peak.png?500|}} 
 + 
 +Current model with 3 onboard 10W RGBW LEDs and integrated heatsink. 
 +==== Luma-S-4.0 [PRE-PRODUCTION] ====
 Current model for driving high-power RGB LED strips Current model for driving high-power RGB LED strips
  
Line 18: Line 21:
 Initial 10W RGBW LED model with RJ45 and screw terminal connectors mounted on the top of the board (current models have these components on the bottom). This model adds 4 constant-current buck drivers for each LED channel, an on-board led, an on-board heatsink, a temperature sensor, and a crystal for clocking at 16MHz. Initial 10W RGBW LED model with RJ45 and screw terminal connectors mounted on the top of the board (current models have these components on the bottom). This model adds 4 constant-current buck drivers for each LED channel, an on-board led, an on-board heatsink, a temperature sensor, and a crystal for clocking at 16MHz.
 ==== Luma-1L-3.0 ==== ==== Luma-1L-3.0 ====
 +{{:luma:9nodes.jpg?600|}}
 +
 Luma board with an off-board LED driven with discrete transistors and surface-mount current-limiting resistors. This model adds reverse voltage protection, a transistor-controlled fan output, and better heat dissipation for current-limiting resistors. Luma board with an off-board LED driven with discrete transistors and surface-mount current-limiting resistors. This model adds reverse voltage protection, a transistor-controlled fan output, and better heat dissipation for current-limiting resistors.
 ==== Luma-1L-2.0 ==== ==== Luma-1L-2.0 ====
 +
 +{{:luma:luma2.0.jpg?600|}}
 +
 The first Luma board to communicate over RS485. Uses current-limiting resistors and transistors to drive an off-board LED. The first Luma board to communicate over RS485. Uses current-limiting resistors and transistors to drive an off-board LED.
 ==== Luma-1L-1.0 ==== ==== Luma-1L-1.0 ====
 +
 +{{:luma:tinyrgb-bottom1.jpg?500|}}
 +
 Intial Luma prototype, also known as TinyRGB. Communication over I2C using Cyz_RGB, an alternate firmware for BlinkM modules. Intial Luma prototype, also known as TinyRGB. Communication over I2C using Cyz_RGB, an alternate firmware for BlinkM modules.
luma/products.txt · Last modified: 2023/03/23 02:48 by 127.0.0.1